Date of sending : 2011.02.15         Filename : D13O4RUB2.BIN
Rom-ID          : D13O4RUB2
Type            : U70-P6
System(Control) : D13
Device(Protocol): O4  (ICT004+PLUSE)
Judgement(Notes): RUB2
Version         : V11.02
Checksum        : B201
Currency        : RUR
Accepted notes  : 10(1997,2004),50(1997,2004),100(1997,2004),500(1997,2004),1000(1997,2004,2010)    
Accepted ways: 4
                  

Dip switch settings:
-----------------------------------------
1    *OFF         OFF         OFF           OFF        ON           ON           ON             ON
2     OFF         OFF         ON            ON         OFF          OFF          ON             ON
3     OFF         ON          OFF           ON         OFF          ON           OFF            ON
       |           |           |             |          |            |            |              |
     1 Pulse    2 Pulse     3 Pulse      4 Pulse      5 Pulse    10 Pulse     20 Pulse     100 Pulse
      /10 RUR    /10 RUR     /10 RUR      /10 RUR      /10 RUR     /10 RUR      /10 RUR       /10 RUR
     (Note)

---------------------------------------
    ON :  Fast output Pulse (Lo = 50ms Hi = 100ms)
4 * OFF:  Slow output Pulse (Lo = 50ms Hi = 300ms)
-----------------------------------------
    ON : Inhibit level Active Low
5 * OFF: Inhibit level Active High
-----------------------------------------
6 * ON : Accept  10    RUR
    OFF: Reject  10    RUR
-----------------------------------------
  * ON : Accept  50    RUR
7   OFF: Reject  50    RUR
-----------------------------------------
  * ON : Accept  100   RUR
8   OFF: Reject  100   RUR
-----------------------------------------
  * ON : Accept  500   RUR
9   OFF: Reject  500   RUR
-----------------------------------------
  * ON : Accept  1000  RUR
10  OFF: Reject  1000  RUR
-----------------------------------------

  
---------------------------------------|---------------------------------------
 ICT Interface                         | Pulse Mode
                                       |
SW2                                    | SW2
---------------------------------------|---------------------------------------
1   ON : Not used                      | 1   ON : Credit-Pulse Normal HIGH
    OFF: Not used                      |    *OFF: Credit-Pulse Normal LOW
---------------------------------------|---------------------------------------
2  *ON : Pulse Mode
    OFF: ICT Interface  (ICT004) 
-------------------------------------------------------------------------------
3   ON : Harness Disable
   *OFF: Harness Enable
-------------------------------------------------------------------------------
4   ON : Reserved
    OFF: Reserved
-------------------------------------------------------------------------------

NOTE @
------
   * Manufacture setting: (1) Please reset the bill acceptor after set the dip switch.
                          (2) Dip switches 1 to 5 are only used for pulse protocol.


